Data Collections (Packaging)

1. In the Packaging operation, do the following:

   1. Select More and then select Data Collection.
   2. Select DC 1 and then type Tare Weight.

   3. In the Tare Weight data collection, do the following:

      1. Select More and then select Data Collection Details.
      2. Select Part Family-Feature-Operation , expand Packaging Features - 4 - Packaging (6), and select Tare Weight / Chips-Packaged.
   4. Select Apply.

   5. Select the Tare Weight Attributes section, and then do the following:

      1. In the Image section, select More , select Upload Image .
      2. Browse to TareWeight.png, and then select Open.
   6. Select Apply and then select Save.

2. In the Packaging operation, do the following:

   1. Select More and then select Data Collection.
   2. Select DC 1 and then type Bag Quality Checks.

   3. In the Bag Quality Checks data collection, do the following:

      1. Select More and then select Data Collection Details.

      2. Select Part Family-Feature-Operation , expand Packaging Features - 4 - Packaging (6), and select the following data collections:

         • Label Check / Bags
         • Tear Strength / Bags
         • Nitrogen Pressure / Chips-Packaged
   4. Select Apply.

   5. Select the Bag Quality Checks Attributes section, and then do the following:

      1. In the Image section, select More , select Upload Image .
      2. Browse to BagQualityChecks.png, and then select Open.
   6. Select Apply and then select Save.

3. In the Bag Quality Checks data collection, select More , select Configure Parameters, and then do the following:

   1. For each feature, select and drag Reorder to the following order:

      • Nitrogen Pressure
      • Tear Strength
      • Label Check
   2. Under Sample Size for the Label Check feature, select 3 and then type 1.
   3. Select Save.
   4. Under Individual Settings for the Label Check feature, select Default.
   5. Under Feature Type : Defective with a Code Group, select the Code List radio button, and then select the Code Only radio button.
   6. Select Apply and then select Settings .

   7. Under the Sequence Rule tab, do the following:

      1. Select Sequence between Chips-Packaged - Nitrogen Pressure and Bags - Tear Strength.
      2. Select Sequence between Bags - Tear Strength and Bags - Label Check.
   8. Select Apply and then select Save & Close.

4. In the Packaging operation, do the following:

   1. Select More and then select Data Collection.
   2. Select DC 1 and then type Net Weight.

   3. In the Net Weight data collection, do the following:

      1. Select More and then select Data Collection Details.
      2. Select Part Family-Feature-Operation , expand Packaging Features - 4 - Packaging (6), and select Gross Weight / Chips-Packaged.
   4. Select Apply.

   5. Select the Net Weight Attributes section, and then do the following:

      1. In the Image section, select More , select Upload Image .
      2. Browse to NetWeight.png, and then select Open.
   6. Select Apply and then select Save.
5. In the Net Weight data collection, select More , select Configure Parameters, and under Sample Size for the Gross Weight feature, select 3 and then type 5.
6. Select Save & Close.

Next Step: Calculations (Packaging)